Manjaro Linux

Русское сообщество

Не просыпается wi-fi Atheros

Проблемы и вопросы, касающиеся ядра и аппаратной поддержки.

Не просыпается wi-fi Atheros

Сообщение BABU » 04 фев 2015, 14:36

У меня проблема с wi-fi на чипе Atheros.
rfkill list
Код: Выделить всё
0: acer-wireless: Wireless LAN
   Soft blocked: yes
   Hard blocked: no
1: phy0: Wireless LAN
   Soft blocked: no
   Hard blocked: no

Хардварная кнопка включения wi-fi не реагирует, вот dmesg, скорее всего система не может её распознать, судя по последним строчкам.
Код: Выделить всё
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.7.4-1-MANJARO (builduser@manjaro) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 16 18:43:35 UTC 2015
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-316-x86_64 root=UUID=f4b58aad-2230-4614-b011-857e24f09bd4 rw quiet splash
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf8a0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf8a1000-0x00000000bf8a6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf8a7000-0x00000000bf9bbfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf9bc000-0x00000000bfa0efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfa0f000-0x00000000bfb07fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfb08000-0x00000000bfd0efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfd0f000-0x00000000bfd18fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfd19000-0x00000000bfd1efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfd1f000-0x00000000bfd63fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfd64000-0x00000000bfd9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfd9f000-0x00000000bfde4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfde5000-0x00000000bfdfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfdff000-0x00000000bfdfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Packard Bell BV EASYNOTE TN65  /Etna GM        , BIOS PBP08B1.P25     09/17/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f7080-0x000f708f] mapped at [ffff8800000f7080]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
[    0.000000] BRK [0x01b29000, 0x01b29fff] PGTABLE
[    0.000000] BRK [0x01b2a000, 0x01b2afff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbf600000-0xbf7fffff]
[    0.000000]  [mem 0xbf600000-0xbf7fffff] page 2M
[    0.000000] BRK [0x01b2b000, 0x01b2bfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbc000000-0xbf5fffff]
[    0.000000]  [mem 0xbc000000-0xbf5fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x80000000-0xbbffffff]
[    0.000000]  [mem 0x80000000-0xbbffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x7fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0xbf800000-0xbf8a0fff]
[    0.000000]  [mem 0xbf800000-0xbf8a0fff] page 4k
[    0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbf8a7000-0xbf9bbfff]
[    0.000000]  [mem 0xbf8a7000-0xbf9bbfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbfa0f000-0xbfb07fff]
[    0.000000]  [mem 0xbfa0f000-0xbfb07fff] page 4k
[    0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbfd0f000-0xbfd18fff]
[    0.000000]  [mem 0xbfd0f000-0xbfd18fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbfd1f000-0xbfd63fff]
[    0.000000]  [mem 0xbfd1f000-0xbfd63fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbfd9f000-0xbfde4fff]
[    0.000000]  [mem 0xbfd9f000-0xbfde4fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbfdff000-0xbfdfffff]
[    0.000000]  [mem 0xbfdff000-0xbfdfffff] page 4k
[    0.000000] RAMDISK: [mem 0x3776a000-0x37bacfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6F10 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 0x00000000BFDF77D7 00005C (v01 PacBel PBNB0022 06040000 BNBP 00000000)
[    0.000000] ACPI: FACP 0x00000000BFDE7000 0000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 0x00000000BFDE8000 0073B3 (v02 Intel  CANTIGA  06040000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x00000000BFD9EFC0 000040
[    0.000000] ACPI: HPET 0x00000000BFDFED86 000038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 0x00000000BFDFEDBE 00003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: SLIC 0x00000000BFDFEDFA 000176 (v01 PacBel PBNB0022 06040000 PBNB 00000001)
[    0.000000] ACPI: APIC 0x00000000BFDFEF70 000068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 0x00000000BFDFEFD8 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 0x00000000BFDE6000 000655 (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bfdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0xbfdfffff]
[    0.000000]   NODE_DATA [mem 0xbfde0000-0xbfde4fff]
[    0.000000]  [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bbe00000-ffff8800bedfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xbf8a0fff]
[    0.000000]   node   0: [mem 0xbf8a7000-0xbf9bbfff]
[    0.000000]   node   0: [mem 0xbfa0f000-0xbfb07fff]
[    0.000000]   node   0: [mem 0xbfd0f000-0xbfd18fff]
[    0.000000]   node   0: [mem 0xbfd1f000-0xbfd63fff]
[    0.000000]   node   0: [mem 0xbfd9f000-0xbfde4fff]
[    0.000000]   node   0: [mem 0xbfdff000-0xbfdfffff]
[    0.000000] On node 0 totalpages: 785121
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12216 pages used for memmap
[    0.000000]   DMA32 zone: 781125 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf8a1000-0xbf8a6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf9bc000-0xbfa0efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfb08000-0xbfd0efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfd19000-0xbfd1efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfd64000-0xbfd9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfde5000-0xbfdfefff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bf400000 s82688 r8192 d23808 u1048576
[    0.000000] pcpu-alloc: s82688 r8192 d23808 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 772820
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-316-x86_64 root=UUID=f4b58aad-2230-4614-b011-857e24f09bd4 rw quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3074932K/3140484K available (5389K kernel code, 892K rwdata, 1704K rodata, 1132K init, 1172K bss, 65552K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]    RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:8448 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 12582912 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1994.942 MHz processor
[    0.003362] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.12 BogoMIPS (lpj=6649806)
[    0.003370] pid_max: default: 32768 minimum: 301
[    0.003392] ACPI: Core revision 20140424
[    0.017611] ACPI: All ACPI Tables successfully acquired
[    0.020080] Security Framework initialized
[    0.020098] Yama: becoming mindful.
[    0.023974] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.027827] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.029567] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.029588] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.030343] Initializing cgroup subsys memory
[    0.030405] Initializing cgroup subsys devices
[    0.030423] Initializing cgroup subsys freezer
[    0.030432] Initializing cgroup subsys net_cls
[    0.030445] Initializing cgroup subsys blkio
[    0.030456] Initializing cgroup subsys bfqio
[    0.030528] CPU: Physical Processor ID: 0
[    0.030531] CPU: Processor Core ID: 0
[    0.030536] mce: CPU supports 6 MCE banks
[    0.030553] CPU0: Thermal monitoring enabled (TM1)
[    0.030569] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[    0.030800] Freeing SMP alternatives memory: 20K (ffffffff819fc000 - ffffffff81a01000)
[    0.033437] ftrace: allocating 20635 entries in 81 pages
[    0.050599] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.085893] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P7350  @ 2.00GHz (fam: 06, model: 17, stepping: 06)
[    0.086666] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.086666] ... version:                2
[    0.086666] ... bit width:              40
[    0.086666] ... generic registers:      2
[    0.086666] ... value mask:             000000ffffffffff
[    0.086666] ... max period:             000000007fffffff
[    0.086666] ... fixed-purpose events:   3
[    0.086666] ... event mask:             0000000700000003
[    0.103440] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.110173] x86: Booting SMP configuration:
[    0.110178] .... node  #0, CPUs:      #1
[    0.123384] x86: Booted up 1 node, 2 CPUs
[    0.123393] smpboot: Total of 2 processors activated (7982.25 BogoMIPS)
[    0.126885] devtmpfs: initialized
[    0.136385] PM: Registering ACPI NVS region [mem 0xbfd64000-0xbfd9efff] (241664 bytes)
[    0.139213] pinctrl core: initialized pinctrl subsystem
[    0.139302] RTC time: 10:23:14, date: 02/04/15
[    0.139426] NET: Registered protocol family 16
[    0.139768] cpuidle: using governor ladder
[    0.139775] cpuidle: using governor menu
[    0.139840] ACPI: bus type PCI registered
[    0.139845] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.140056] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.140064] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.141149] PCI: Using configuration type 1 for base access
[    0.141503] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.141507] mtrr: probably your BIOS does not setup all CPUs.
[    0.141510] mtrr: corrected configuration.
[    0.166833] ACPI: Added _OSI(Module Device)
[    0.166833] ACPI: Added _OSI(Processor Device)
[    0.166833] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.166833] ACPI: Added _OSI(Processor Aggregator Device)
[    0.176024] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.177324] ACPI: Dynamic OEM Table Load:
[    0.177341] ACPI: SSDT 0xFFFF8800BF00F000 000223 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.178301] ACPI: Dynamic OEM Table Load:
[    0.178316] ACPI: SSDT 0xFFFF8800BAA9E800 000549 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.210512] ACPI: Dynamic OEM Table Load:
[    0.210527] ACPI: SSDT 0xFFFF8800BA574200 0001CF (v01 PmRef  ApIst    00003000 INTL 20050624)
[    0.223496] ACPI: Dynamic OEM Table Load:
[    0.223509] ACPI: SSDT 0xFFFF8800BA400540 00008D (v01 PmRef  ApCst    00003000 INTL 20050624)
[    0.253464] ACPI: Interpreter enabled
[    0.253480] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.253492] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.253528] ACPI: (supports S0 S3 S4 S5)
[    0.253533] ACPI: Using IOAPIC for interrupt routing
[    0.253603] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.081456] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.081471] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.081483] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.083909] PCI host bridge to bus 0000:00
[    1.083918] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.083924] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.083930] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.083935] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.083940] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    1.083945] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    1.083951] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    1.083956] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    1.083961] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    1.083983] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    1.084029] DMAR: Forcing write-buffer flush capability
[    1.084032] DMAR: Disabling IOMMU for graphics on this chipset
[    1.084243] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[    1.084340] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.084599] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    1.084678] pci 0000:00:1a.0: reg 0x20: [io  0x1800-0x181f]
[    1.084880] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.085004] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    1.085078] pci 0000:00:1a.1: reg 0x20: [io  0x1820-0x183f]
[    1.085264] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    1.085388] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    1.085462] pci 0000:00:1a.2: reg 0x20: [io  0x1840-0x185f]
[    1.085653] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    1.085793] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    1.085831] pci 0000:00:1a.7: reg 0x10: [mem 0xf2404800-0xf2404bff]
[    1.085979] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    1.086083] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    1.086212] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    1.086244] pci 0000:00:1b.0: reg 0x10: [mem 0xf2400000-0xf2403fff 64bit]
[    1.086372] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.086479] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.086603] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    1.086748] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.086972] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    1.087106] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.087327] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    1.087461] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.087688] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    1.087775] pci 0000:00:1d.0: reg 0x20: [io  0x1860-0x187f]
[    1.087976] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.088104] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    1.088182] pci 0000:00:1d.1: reg 0x20: [io  0x1880-0x189f]
[    1.088381] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    1.088505] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    1.088593] pci 0000:00:1d.2: reg 0x20: [io  0x18a0-0x18bf]
[    1.088793] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    1.088931] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    1.088968] pci 0000:00:1d.7: reg 0x10: [mem 0xf2404c00-0xf2404fff]
[    1.089116] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    1.089227] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    1.089345] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    1.089523] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    1.089648] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    1.089990] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    1.090034] pci 0000:00:1f.2: reg 0x10: [io  0x18f0-0x18f7]
[    1.090050] pci 0000:00:1f.2: reg 0x14: [io  0x18e4-0x18e7]
[    1.090066] pci 0000:00:1f.2: reg 0x18: [io  0x18e8-0x18ef]
[    1.090082] pci 0000:00:1f.2: reg 0x1c: [io  0x18e0-0x18e3]
[    1.090098] pci 0000:00:1f.2: reg 0x20: [io  0x18c0-0x18df]
[    1.090114] pci 0000:00:1f.2: reg 0x24: [mem 0xf2404000-0xf24047ff]
[    1.090198] pci 0000:00:1f.2: PME# supported from D3hot
[    1.090410] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    1.090440] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[    1.090478] pci 0000:00:1f.3: reg 0x20: [io  0x1c00-0x1c1f]
[    1.090815] pci 0000:01:00.0: [1002:95c2] type 00 class 0x030000
[    1.090840] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    1.090856] pci 0000:01:00.0: reg 0x14: [io  0x2000-0x20ff]
[    1.090872] pci 0000:01:00.0: reg 0x18: [mem 0xcfef0000-0xcfefffff]
[    1.090919] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    1.090984] pci 0000:01:00.0: supports D1 D2
[    1.091121] pci 0000:01:00.1: [1002:aa28] type 00 class 0x040300
[    1.091145] pci 0000:01:00.1: reg 0x10: [mem 0xcfeec000-0xcfeeffff]
[    1.091270] pci 0000:01:00.1: supports D1 D2
[    1.096692] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.096701] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    1.096709] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    1.096719] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.096892] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    1.096924] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    1.096968] pci 0000:02:00.0: reg 0x18: [mem 0xf2010000-0xf2010fff 64bit pref]
[    1.096997] pci 0000:02:00.0: reg 0x20: [mem 0xf2000000-0xf200ffff 64bit pref]
[    1.097018] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    1.097133] pci 0000:02:00.0: supports D1 D2
[    1.097138] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.097205] pci 0000:02:00.0: System wakeup disabled by ACPI
[    1.103361] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.103371] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.103386] pci 0000:00:1c.0:   bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[    1.103561] pci 0000:03:00.0: [168c:001c] type 00 class 0x020000
[    1.103602] pci 0000:03:00.0: reg 0x10: [mem 0xf2100000-0xf210ffff 64bit]
[    1.103911] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.103928] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.103940] pci 0000:00:1c.1:   bridge window [mem 0xf2100000-0xf21fffff]
[    1.104116] acpiphp: Slot [1] registered
[    1.104130] pci 0000:00:1c.4: PCI bridge to [bus 04-06]
[    1.104138] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    1.104147] pci 0000:00:1c.4:   bridge window [mem 0xf4000000-0xf5ffffff]
[    1.104158] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    1.104310] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[    1.104329] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.104335] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.104341] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.104347] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    1.104352] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    1.104358] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    1.104363] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    1.104369] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    1.510129] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[    1.510254] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[    1.510373] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[    1.510493] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[    1.510612] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
[    1.510729] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
[    1.510846] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    1.510965] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
[    1.511344] ACPI: Enabled 4 GPEs in block 00 to 3F
[    1.511477] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.511762] vgaarb: setting as boot device: PCI:0000:01:00.0
[    1.511769] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.511774] vgaarb: loaded
[    1.511778] vgaarb: bridge control possible 0000:01:00.0
[    1.511876] PCI: Using ACPI for IRQ routing
[    1.522214] PCI: pci_cache_line_size set to 64 bytes
[    1.522318] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    1.522323] e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff]
[    1.522329] e820: reserve RAM buffer [mem 0xbf9bc000-0xbfffffff]
[    1.522334] e820: reserve RAM buffer [mem 0xbfb08000-0xbfffffff]
[    1.522339] e820: reserve RAM buffer [mem 0xbfd19000-0xbfffffff]
[    1.522344] e820: reserve RAM buffer [mem 0xbfd64000-0xbfffffff]
[    1.522348] e820: reserve RAM buffer [mem 0xbfde5000-0xbfffffff]
[    1.522352] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[    1.522664] NetLabel: Initializing
[    1.522669] NetLabel:  domain hash size = 128
[    1.522671] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.522708] NetLabel:  unlabeled traffic allowed by default
[    1.522765] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    1.522773] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    1.522784] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    1.525353] Switched to clocksource hpet
[    1.540063] pnp: PnP ACPI init
[    1.540113] ACPI: bus type PNP registered
[    1.540467] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.540564] pnp 00:01: Plug and Play ACPI device, IDs SYN0315 SYN0300 SYN0002 PNP0f13 (active)
[    1.540864] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[    1.540874] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    1.541043] system 00:03: [io  0x0480-0x048f] has been reserved
[    1.541050] system 00:03: [io  0xffff] has been reserved
[    1.541057] system 00:03: [io  0xffff] has been reserved
[    1.541063] system 00:03: [io  0x0400-0x047f] could not be reserved
[    1.541069] system 00:03: [io  0x1180-0x11ff] has been reserved
[    1.541076] system 00:03: [io  0xfe00] has been reserved
[    1.541083] system 00:03: [mem 0xff800000-0xff800fff] has been reserved
[    1.541091] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.541190] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.541567] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.541574] system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.541581] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.541587] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.541594] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    1.541600] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.541608] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.946953] pnp: PnP ACPI: found 6 devices
[    1.946959] ACPI: bus type PNP unregistered
[    1.957547] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff] to [bus 02] add_size 400000
[    1.957567] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    1.957575] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    1.957608] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[    1.957614] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    1.957621] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    1.957637] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc04fffff]
[    1.957654] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0500000-0xc06fffff 64bit pref]
[    1.957663] pci 0000:00:1c.1: BAR 13: assigned [io  0x5000-0x5fff]
[    1.957678] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0700000-0xc07000ff 64bit]
[    1.957699] pci 0000:01:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[    1.957705] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.957712] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    1.957721] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    1.957728] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.957740] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[    1.957745] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.957752] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.957762] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc04fffff]
[    1.957770] pci 0000:00:1c.0:   bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[    1.957782] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.957788] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    1.957798] pci 0000:00:1c.1:   bridge window [mem 0xf2100000-0xf21fffff]
[    1.957806] pci 0000:00:1c.1:   bridge window [mem 0xc0500000-0xc06fffff 64bit pref]
[    1.957818] pci 0000:00:1c.4: PCI bridge to [bus 04-06]
[    1.957825] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    1.957835] pci 0000:00:1c.4:   bridge window [mem 0xf4000000-0xf5ffffff]
[    1.957843] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    1.957855] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[    1.957875] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.957881] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.957886] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.957892] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    1.957897] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    1.957902] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[    1.957907] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
[    1.957913] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xfebfffff]
[    1.957918] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.957924] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
[    1.957929] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.957935] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    1.957940] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc04fffff]
[    1.957945] pci_bus 0000:02: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
[    1.957951] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    1.957956] pci_bus 0000:03: resource 1 [mem 0xf2100000-0xf21fffff]
[    1.957961] pci_bus 0000:03: resource 2 [mem 0xc0500000-0xc06fffff 64bit pref]
[    1.957967] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    1.957972] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf5ffffff]
[    1.957977] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    1.957983] pci_bus 0000:0d: resource 4 [io  0x0000-0x0cf7]
[    1.957988] pci_bus 0000:0d: resource 5 [io  0x0d00-0xffff]
[    1.957993] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[    1.957999] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
[    1.958004] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
[    1.958009] pci_bus 0000:0d: resource 9 [mem 0x000dc000-0x000dffff]
[    1.958015] pci_bus 0000:0d: resource 10 [mem 0x000e0000-0x000e3fff]
[    1.958020] pci_bus 0000:0d: resource 11 [mem 0xc0000000-0xfebfffff]
[    1.958088] NET: Registered protocol family 2
[    1.958581] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.958863] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.959225] TCP: Hash tables configured (established 32768 bind 32768)
[    1.959315] TCP: reno registered
[    1.959334] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.959401] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.959553] NET: Registered protocol family 1
[    1.961821] pci 0000:01:00.0: Video device with shadowed ROM
[    1.961841] PCI: CLS 64 bytes, default 64
[    1.961953] Unpacking initramfs...
[    2.166542] Freeing initrd memory: 4364K (ffff88003776a000 - ffff880037bad000)
[    2.166643] Simple Boot Flag at 0x57 set to 0x1
[    2.167095] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[    2.167113] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[    2.167281] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.167351] Scanning for low memory corruption every 60 seconds
[    2.168046] futex hash table entries: 512 (order: 3, 32768 bytes)
[    2.168870] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.173666] zbud: loaded
[    2.174044] VFS: Disk quotas dquot_6.5.2
[    2.174151] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.174469] msgmni has been set to 6014
[    2.174628] Key type big_key registered
[    2.174965] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.175073] io scheduler noop registered
[    2.175081] io scheduler deadline registered
[    2.175235] io scheduler cfq registered
[    2.175327] io scheduler bfq registered (default)
[    2.175331] BFQ I/O-scheduler version: v7r6
[    2.175742] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    2.176020] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    2.176302] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    2.176588] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    2.176832] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.176880] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.176973] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    2.176977] vesafb: scrolling: redraw
[    2.176982] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    2.177022] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
[    2.254688] Console: switching to colour frame buffer device 128x48
[    2.332101] fb0: VESA VGA frame buffer device
[    2.332147] intel_idle: does not run on family 6 model 23
[    2.332225] GHES: HEST is not enabled!
[    2.332396] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.333497] Linux agpgart interface v0.103
[    2.333605] rtc_cmos 00:04: RTC can wake from S4
[    2.333832] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.333873] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.333902] ledtrig-cpu: registered to indicate activity on CPUs
[    2.334173] TCP: cubic registered
[    2.334491] NET: Registered protocol family 10
[    2.334983] NET: Registered protocol family 17
[    2.335649] registered taskstats version 1
[    2.336447]   Magic number: 3:157:375
[    2.336518] acpi LNXVIDEO:01: hash matches
[    2.336583] rtc_cmos 00:04: setting system clock to 2015-02-04 10:23:16 UTC (1423045396)
[    2.336869] PM: Hibernation image not present or could not be loaded.
[    2.340027] Freeing unused kernel memory: 1132K (ffffffff818e1000 - ffffffff819fc000)
[    2.340032] Write protecting the kernel read-only data: 8192k
[    2.345548] Freeing unused kernel memory: 744K (ffff880001546000 - ffff880001600000)
[    2.347997] Freeing unused kernel memory: 344K (ffff8800017aa000 - ffff880001800000)
[    2.364090] random: systemd-tmpfile urandom read with 5 bits of entropy available
[    2.407171] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.419043] i8042: Detected active multiplexing controller, rev 1.1
[    2.423615] ACPI: bus type USB registered
[    2.423688] usbcore: registered new interface driver usbfs
[    2.423722] usbcore: registered new interface driver hub
[    2.427612] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.427760] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.427846] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.427929] usbcore: registered new device driver usb
[    2.427960] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.429158] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.429874] uhci_hcd: USB Universal Host Controller Interface driver
[    2.430508] ehci-pci: EHCI PCI platform driver
[    2.430686] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.430704] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.430718] uhci_hcd 0000:00:1a.0: detected 2 ports
[    2.430769] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
[    2.430944] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.431305] hub 1-0:1.0: USB hub found
[    2.431326] hub 1-0:1.0: 2 ports detected
[    2.432368] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.432387] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    2.432401] uhci_hcd 0000:00:1a.1: detected 2 ports
[    2.432431] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
[    2.433327] hub 2-0:1.0: USB hub found
[    2.433393] hub 2-0:1.0: 2 ports detected
[    2.434310] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    2.434326] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[    2.434349] ehci-pci 0000:00:1a.7: debug port 1
[    2.438292] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    2.438309] ehci-pci 0000:00:1a.7: irq 20, io mem 0xf2404800
[    2.441357] SCSI subsystem initialized
[    2.444675] libata version 3.00 loaded.
[    2.446721] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.450194] hub 3-0:1.0: USB hub found
[    2.450217] hub 3-0:1.0: 6 ports detected
[    2.473500] hub 1-0:1.0: USB hub found
[    2.473526] hub 1-0:1.0: 2 ports detected
[    2.496835] hub 2-0:1.0: USB hub found
[    2.496858] hub 2-0:1.0: 2 ports detected
[    2.497330] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.497347] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[    2.497370] ehci-pci 0000:00:1d.7: debug port 1
[    2.501281] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.501318] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf2404c00
[    2.503176] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.510038] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.510471] hub 4-0:1.0: USB hub found
[    2.510492] hub 4-0:1.0: 6 ports detected
[    2.511116] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    2.511134] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    2.511147] uhci_hcd 0000:00:1a.2: detected 2 ports
[    2.511179] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001840
[    2.511633] hub 5-0:1.0: USB hub found
[    2.511655] hub 5-0:1.0: 2 ports detected
[    2.512120] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.512136] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    2.512148] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.512176] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    2.512595] hub 6-0:1.0: USB hub found
[    2.512624] hub 6-0:1.0: 2 ports detected
[    2.513063] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.513078] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    2.513090] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.513136] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
[    2.513557] hub 7-0:1.0: USB hub found
[    2.513577] hub 7-0:1.0: 2 ports detected
[    2.513876] ahci 0000:00:1f.2: version 3.0
[    2.514095] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    2.514170] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.514218] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.514226] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems
[    2.535212] scsi0 : ahci
[    2.535537] scsi1 : ahci
[    2.535819] scsi2 : ahci
[    2.536084] scsi3 : ahci
[    2.536351] scsi4 : ahci
[    2.536613] scsi5 : ahci
[    2.536797] ata1: SATA max UDMA/133 abar m2048@0xf2404000 port 0xf2404100 irq 44
[    2.536804] ata2: SATA max UDMA/133 abar m2048@0xf2404000 port 0xf2404180 irq 44
[    2.536808] ata3: DUMMY
[    2.536811] ata4: DUMMY
[    2.536816] ata5: SATA max UDMA/133 abar m2048@0xf2404000 port 0xf2404300 irq 44
[    2.536821] ata6: SATA max UDMA/133 abar m2048@0xf2404000 port 0xf2404380 irq 44
[    2.537073] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.537088] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    2.537106] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.537155] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    2.537757] hub 8-0:1.0: USB hub found
[    2.537782] hub 8-0:1.0: 2 ports detected
[    2.756713] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.856703] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.857848] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
[    2.857856] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.859170] ata1.00: configured for UDMA/133
[    2.859394] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54252 C31P PQ: 0 ANSI: 5
[    2.903849] usbcore: registered new interface driver usb-storage
[    2.904531] usbcore: registered new interface driver uas
[    2.905136] ums-realtek 3-1:1.0: USB Mass Storage device detected
[    2.907796] scsi6 : usb-storage 3-1:1.0
[    2.908005] usbcore: registered new interface driver ums-realtek
[    3.006719] usb 3-2: new high-speed USB device number 3 using ehci-pci
[    3.170030] tsc: Refined TSC clocksource calibration: 1994.999 MHz
[    3.176712] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.180512] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RP05, max UDMA/133
[    3.185602] ata2.00: configured for UDMA/133
[    3.298760] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RP05 PQ: 0 ANSI: 5
[    3.616715] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[    3.626700] ata5: SATA link down (SStatus 0 SControl 300)
[    3.787361] hidraw: raw HID events driver (C) Jiri Kosina
[    3.801575] usbcore: registered new interface driver usbhid
[    3.801580] usbhid: USB HID core driver
[    3.802976] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:093A:2510.0001/input/input5
[    3.803097] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[    3.890044] usb 7-2: new low-speed USB device number 2 using uhci_hcd
[    3.912284] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.946702] ata6: SATA link down (SStatus 0 SControl 300)
[    3.982656] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    3.982800] sd 0:0:0:0: [sda] Write Protect is off
[    3.982808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.982865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.986642] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.066586]  sda: sda1 < sda5 sda6 sda7 sda8 > sda2
[    4.067778] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.089217] input: GreenAsia Inc.    USB Joystick      as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/0003:0E8F:0003.0002/input/input6
[    4.089336] pantherlord 0003:0E8F:0003.0002: input,hidraw1: USB HID v1.10 Joystick [GreenAsia Inc.    USB Joystick     ] on usb-0000:00:1d.1-2/input0
[    4.089370] pantherlord 0003:0E8F:0003.0002: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula <anssi.hannula@gmail.com>
[    4.096525] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.096533] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.096975] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.170121] Switched to clocksource tsc
[    5.311727] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.356026] random: nonblocking pool is initialized
[    8.068549] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[    8.168621] FS-Cache: Loaded
[    8.405811] RPC: Registered named UNIX socket transport module.
[    8.405818] RPC: Registered udp transport module.
[    8.405822] RPC: Registered tcp transport module.
[    8.405825] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.619709] FS-Cache: Netfs 'nfs' registered for caching
[    8.912214] systemd-journald[135]: Received request to flush runtime journal from PID 1
[   10.519906] Monitor-Mwait will be used to enter C-1 state
[   10.519928] Monitor-Mwait will be used to enter C-2 state
[   10.519939] Monitor-Mwait will be used to enter C-3 state
[   10.519949] tsc: Marking TSC unstable due to TSC halts in idle
[   10.520586] ACPI: acpi_idle registered with cpuidle
[   10.525605] Switched to clocksource hpet
[   10.604917] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
[   10.606054] ACPI: Lid Switch [LID0]
[   10.606136] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
[   10.606141] ACPI: Sleep Button [SLPB]
[   10.606211] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
[   10.606214] ACPI: Power Button [PWRF]
[   10.641501] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.696817] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   10.733809] wmi: Mapper loaded
[   10.793587] ACPI: Battery Slot [BAT0] (battery present)
[   10.795530] acpi device:02: registered as cooling_device2
[   10.795652] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input10
[   10.800568] ACPI: AC Adapter [ADP1] (on-line)
[   10.817616] thermal LNXTHERM:00: registered as thermal_zone0
[   10.817627] ACPI: Thermal Zone [TZS0] (63 C)
[   10.826627] thermal LNXTHERM:01: registered as thermal_zone1
[   10.826630] ACPI: Thermal Zone [TZS1] (63 C)
[   10.854133] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   10.854265] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   10.854298] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[   10.885724] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   10.975459] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[   10.975468] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.975472] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011bb (\GPIO) (20140424/utaddress-258)
[   10.975477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.975479] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011bb (\GPIO) (20140424/utaddress-258)
[   10.975483] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.975485] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.024735] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   11.024750] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   11.028201] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[   11.028446] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc90000674000, 00:1f:16:0b:33:55, XID 14a00000 IRQ 47
[   11.038474] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   11.038479] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.038482] sound hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   11.038485] sound hdaudioC0D0:    mono: mono_out=0x0
[   11.038487] sound hdaudioC0D0:    inputs:
[   11.038490] sound hdaudioC0D0:      Mic=0x18
[   11.038493] sound hdaudioC0D0:      Internal Mic=0x12
[   11.048376] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input12
[   11.048575] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.048627] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   11.110400] [drm] Initialized drm 1.1.0 20060810
[   11.345004] ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c1f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c0f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[   11.345013] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.489270] [drm] radeon kernel modesetting enabled.
[   11.489340] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[   11.489343] fb: switching to radeondrmfb from VESA VGA
[   11.489369] Console: switching to colour dummy device 80x25
[   11.489716] [drm] initializing kernel modesetting (RV620 0x1002:0x95C2 0x1631:0xC216).
[   11.489734] [drm] register mmio base: 0xCFEF0000
[   11.489736] [drm] register mmio size: 65536
[   11.489814] ATOM BIOS: PB_WIS_08B1_DDR2
[   11.489849] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[   11.489852] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[   11.489855] [drm] Detected VRAM RAM=256M, BAR=256M
[   11.489857] [drm] RAM width 64bits DDR
[   11.489921] [TTM] Zone  kernel: Available graphics memory: 1540768 kiB
[   11.489923] [TTM] Initializing pool allocator
[   11.489929] [TTM] Initializing DMA pool allocator
[   11.489955] [drm] radeon: 256M of VRAM memory ready
[   11.489958] [drm] radeon: 512M of GTT memory ready.
[   11.489971] [drm] Loading RV620 Microcode
[   11.541372] cfg80211: Calling CRDA to update world regulatory domain
[   12.056869] [drm] radeon: power management initialized
[   12.056877] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   12.080617] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   12.080662] radeon 0000:01:00.0: WB enabled
[   12.080666] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff8800b5f2dc00
[   12.080669] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.080670] [drm] Driver supports precise vblank timestamp query.
[   12.080673] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   12.080695] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
[   12.080710] radeon 0000:01:00.0: radeon: using MSI.
[   12.080737] [drm] radeon: irq initialized.
[   12.112285] [drm] ring test on 0 succeeded in 1 usecs
[   12.112442] [drm] ib test on ring 0 succeeded in 0 usecs
[   12.117316] [drm] Radeon Display Connectors
[   12.117319] [drm] Connector 0:
[   12.117321] [drm]   LVDS-1
[   12.117323] [drm]   DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[   12.117325] [drm]   Encoders:
[   12.117326] [drm]     LCD1: INTERNAL_KLDSCP_LVTMA
[   12.117328] [drm] Connector 1:
[   12.117329] [drm]   HDMI-A-1
[   12.117330] [drm]   HPD1
[   12.117333] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[   12.117334] [drm]   Encoders:
[   12.117335] [drm]     DFP1: INTERNAL_UNIPHY
[   12.117337] [drm] Connector 2:
[   12.117338] [drm]   DVI-I-1
[   12.117339] [drm]   HPD2
[   12.117342] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[   12.117343] [drm]   Encoders:
[   12.117344] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   12.117346] [drm]     DFP2: INTERNAL_UNIPHY
[   12.262993] acer_wmi: Acer Laptop ACPI-WMI Extras
[   12.263959] acer_wmi: Brightness must be controlled by acpi video driver
[   12.264155] input: Acer BMA150 accelerometer as /devices/virtual/input/input17
[   12.276817] ath5k 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   12.276926] ath5k 0000:03:00.0: registered as 'phy0'
[   12.599317] Non-volatile memory driver v1.3
[   12.729589] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1e0b2, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 473126
[   12.774490] iTCO_vendor_support: vendor-support=0
[   12.775144] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.775189] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[   12.775315] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.782088] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input16
[   12.810955] ath: EEPROM regdomain: 0x65
[   12.810958] ath: EEPROM indicates we should expect a direct regpair map
[   12.810961] ath: Country alpha2 being used: 00
[   12.810963] ath: Regpair used: 0x65
[   12.831756] mousedev: PS/2 mouse device common for all mice
[   12.963128] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.963481] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   13.116974] [drm] fb mappable at 0xD0141000
[   13.116978] [drm] vram apper at 0xD0000000
[   13.116980] [drm] size 4325376
[   13.116981] [drm] fb depth is 24
[   13.116983] [drm]    pitch is 5632
[   13.117081] fbcon: radeondrmfb (fb0) is primary device
[   13.117104] Console: switching to colour frame buffer device 170x48
[   13.117112] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   13.117115] radeon 0000:01:00.0: registered panic notifier
[   13.143377] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[   13.770471] media: Linux media interface: v0.10
[   13.861461] Linux video capture interface: v2.00
[   14.027659] uvcvideo: Found UVC 1.00 device CNF8015 (04f2:b112)
[   14.044409] input: CNF8015 as /devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0/input/input20
[   14.044507] usbcore: registered new interface driver uvcvideo
[   14.044509] USB Video Class driver (1.1.1)
[   14.115080] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.994534] r8169 0000:02:00.0 enp2s0: link down
[   17.994558] r8169 0000:02:00.0 enp2s0: link down
[   17.994586] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   18.021650] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   19.526604] r8169 0000:02:00.0 enp2s0: link up
[   19.526616] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   27.887639] fuse init (API version 7.23)
[   33.810806] Bluetooth: Core ver 2.19
[   33.810850] NET: Registered protocol family 31
[   33.810852] Bluetooth: HCI device and connection manager initialized
[   33.810868] Bluetooth: HCI socket layer initialized
[   33.810871] Bluetooth: L2CAP socket layer initialized
[   33.810897] Bluetooth: SCO socket layer initialized
[   34.884722] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   34.884726] Bluetooth: BNEP filters: protocol multicast
[   34.884738] Bluetooth: BNEP socket layer initialized
[   44.623384] Bluetooth: RFCOMM TTY layer initialized
[   44.623399] Bluetooth: RFCOMM socket layer initialized
[   44.623406] Bluetooth: RFCOMM ver 1.11
[   47.920069] atkbd serio0: Unknown key pressed (translated set 2, code 0xd6 on isa0060/serio0).
[   47.920081] atkbd serio0: Use 'setkeycodes e056 <keycode>' to make it known.
[   47.928875] atkbd serio0: Unknown key released (translated set 2, code 0xd6 on isa0060/serio0).
[   47.928889] atkbd serio0: Use 'setkeycodes e056 <keycode>' to make it known.
[  313.399428] atkbd serio0: Unknown key pressed (translated set 2, code 0xd5 on isa0060/serio0).
[  313.399440] atkbd serio0: Use 'setkeycodes e055 <keycode>' to make it known.
[  313.406668] atkbd serio0: Unknown key released (translated set 2, code 0xd5 on isa0060/serio0).
[  313.406679] atkbd serio0: Use 'setkeycodes e055 <keycode>' to make it known.
[  339.563147] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[  339.628080] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready

sudo rfkill unblock all не приводит ни к чему.
Подобную тему я поднимал на формуе РОСА линукс, но помочь мне там смогли на половину - после ждущего/спящего режима wi-fi модуль не выходил из спячки.
Может у кого есть идеи? Или это неразрешимая задача связанная с определённой железякой?
Аватара пользователя
BABU
 
Автор темы
Сообщения: 20
Зарегистрирован: 03 фев 2015, 18:32
Благодарил (а): 6 раз.
Поблагодарили: 3 раз.

Re: Не сразу включается модуль wi-fi

Сообщение dimonmmk » 04 фев 2015, 16:32

BABU, что за ноут?
Аватара пользователя
dimonmmk
 
Сообщения: 604
Зарегистрирован: 10 июл 2014, 19:08
Откуда: 57° 3'51.28" 36° 1'43.38"
Благодарил (а): 14 раз.
Поблагодарили: 134 раз.

Re: Не сразу включается модуль wi-fi

Сообщение BABU » 04 фев 2015, 16:53

dimonmmk писал(а):BABU, что за ноут?

Packerd Bell TN-65
Аватара пользователя
BABU
 
Автор темы
Сообщения: 20
Зарегистрирован: 03 фев 2015, 18:32
Благодарил (а): 6 раз.
Поблагодарили: 3 раз.

Re: Не сразу включается модуль wi-fi

Сообщение dimonmmk » 04 фев 2015, 17:22

lsmod|grep acer покажите
Аватара пользователя
dimonmmk
 
Сообщения: 604
Зарегистрирован: 10 июл 2014, 19:08
Откуда: 57° 3'51.28" 36° 1'43.38"
Благодарил (а): 14 раз.
Поблагодарили: 134 раз.

Re: Не сразу включается модуль wi-fi

Сообщение BABU » 04 фев 2015, 17:32

lsmod|grep acer
Код: Выделить всё
acer_wmi               30174  0
sparse_keymap          12818  1 acer_wmi
led_class              12859  2 ath5k,acer_wmi
rfkill                 18867  5 cfg80211,acer_wmi,bluetooth
wmi                    17339  1 acer_wmi
video                  17995  1 acer_wmi
i8042                  18002  2 acer_wmi,libps2
Последний раз редактировалось BABU 04 фев 2015, 17:33, всего редактировалось 1 раз.
Аватара пользователя
BABU
 
Автор темы
Сообщения: 20
Зарегистрирован: 03 фев 2015, 18:32
Благодарил (а): 6 раз.
Поблагодарили: 3 раз.

Re: Не сразу включается модуль wi-fi

Сообщение dimonmmk » 04 фев 2015, 18:05

сделайте sudo rmmod acer_wmi и, не перегружаясь, попробуйте включить wifi. Если что-то пойдет не так с другими устройствами- просто перезагрузитесь.
Последний раз редактировалось dimonmmk 04 фев 2015, 18:07, всего редактировалось 1 раз.
Аватара пользователя
dimonmmk
 
Сообщения: 604
Зарегистрирован: 10 июл 2014, 19:08
Откуда: 57° 3'51.28" 36° 1'43.38"
Благодарил (а): 14 раз.
Поблагодарили: 134 раз.

Re: Не сразу включается модуль wi-fi

Сообщение BABU » 04 фев 2015, 18:25

Сделал. Wi-fi действительно появился, работал стабильно и без нареканий. После перехода в ждущий режим (закрытие крышки ноутбука) wi-fi отвалился вместе с network manager, как я понял. Так как даже при присоединённом кабеле сеть не работала.
P.S. Забыл добавить что после перезагрузки всё вернулось на круги своя - wi-fi не включается, сеть работает.
Последний раз редактировалось BABU 04 фев 2015, 19:35, всего редактировалось 1 раз.
Аватара пользователя
BABU
 
Автор темы
Сообщения: 20
Зарегистрирован: 03 фев 2015, 18:32
Благодарил (а): 6 раз.
Поблагодарили: 3 раз.

Re: Не сразу включается модуль wi-fi

Сообщение dimonmmk » 04 фев 2015, 18:35

BABU писал(а):Сделал. Wi-fi действительно появился, работал стабильно и без нареканий. После перехода в ждущий режим (закрытие крышки ноутбука) wi-fi отвалился

Ага. Так оно и быть должно. Я кажется знаю как победить Ваш WiFi. :)

У Вас установочная флешка/dvd сохранилась? Чтоб если что не так, загрузиться и поправить конфиги?

Добавлено спустя 25 минут 56 секунд:
Выполните:
Код: Выделить всё
echo "blacklist acer_wmi" | sudo tee /etc/modprobe.d/blacklist_acer-wmi.conf

И перезагрузитесь. Проверьте все устройства, если что-то отвалилось или глючит при суспенде- загружайтесь с флешки и удаляйте файл /etc/modprobe.d/blacklist_acer-wmi.conf , будем дальше думать.
Последний раз редактировалось dimonmmk 04 фев 2015, 19:02, всего редактировалось 3 раз(а).
Аватара пользователя
dimonmmk
 
Сообщения: 604
Зарегистрирован: 10 июл 2014, 19:08
Откуда: 57° 3'51.28" 36° 1'43.38"
Благодарил (а): 14 раз.
Поблагодарили: 134 раз.

Re: Не сразу включается модуль wi-fi

Сообщение BABU » 04 фев 2015, 22:52

Прошу прощения что долго не отвечал, периодически обновлял страницу форума и не заметил что появилась страница №2 :)
Сделал по вашему рецепту, всё работало до суспенда. Но в этот раз сеть можно использовать через кабель. Файл /etc/modprobe.d/blacklist_acer-wmi.conf пока не удалял. Уже близко, теперь бы заставить wi-fi просыпаться.
А не поможет ли какой нибудь скрипт, который бы перезагружал модуль, ну или что там нужно? Заранее прошу прощения за возможно глупый вопрос, потому что, так сказать, мой линукс ещё не настолько хорош :)
Последний раз редактировалось BABU 04 фев 2015, 22:53, всего редактировалось 1 раз.
Аватара пользователя
BABU
 
Автор темы
Сообщения: 20
Зарегистрирован: 03 фев 2015, 18:32
Благодарил (а): 6 раз.
Поблагодарили: 3 раз.

Re: Не сразу включается модуль wi-fi

Сообщение dimonmmk » 04 фев 2015, 23:16

BABU писал(а):А не поможет ли какой нибудь скрипт, который бы перезагружал модуль, ну или что там нужно?

Как странно что Вы задали этот вопрос... Есть такой скрипт, а как же... :)
Только сперва надо понять, "что там нужно" и почему он после суспенда не просыпается.
Для этого покажите вывод команд lspci и lsmod|grep ath до сна и после.
Аватара пользователя
dimonmmk
 
Сообщения: 604
Зарегистрирован: 10 июл 2014, 19:08
Откуда: 57° 3'51.28" 36° 1'43.38"
Благодарил (а): 14 раз.
Поблагодарили: 134 раз.

След.

Вернуться в Ядро & Оборудование



Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 1