Manjaro Linux

Русское сообщество

Черные полосы при 1920x1080 на radeon x1950

Если не знаете где задать вопрос, смело задавайте тут

Re: Черные полосы при 1920x1080 на radeon x1950

Сообщение rapturev » 30 дек 2014, 23:27

dimonmmk писал(а):Можно попробовать указать верные размеры матрицы в файле /etc/X11/xorg.conf.d/90-monitor.conf

Код: Выделить всё
Section "Monitor"
Identifier "Monitor0"
DisplaySize 476 268 # In millimeters
EndSection


После этого и после перезагрузки ОС перестала запускаться.
Аватара пользователя
rapturev
 
Автор темы
Сообщения: 8
Зарегистрирован: 28 дек 2014, 20:57
Благодарил (а): 0 раз.
Поблагодарили: 0 раз.

Re: Черные полосы при 1920x1080 на radeon x1950

Сообщение dimonmmk » 30 дек 2014, 23:48

rapturev писал(а):После этого и после перезагрузки ОС перестала запускаться.

Бывает. Я ж говорю- в цифрах не уверен, надо подбирать.
Перестала запускаться система или только иксы?
Если система- загрузитесь с лайвсд и удалите файл.
Если иксы- просто поправьте (или удалите) файл из консоли.

Что в логах-то? dmesg что пишет?
Аватара пользователя
dimonmmk
 
Сообщения: 604
Зарегистрирован: 10 июл 2014, 19:08
Откуда: 57° 3'51.28" 36° 1'43.38"
Благодарил (а): 14 раз.
Поблагодарили: 134 раз.

Re: Черные полосы при 1920x1080 на radeon x1950

Сообщение rapturev » 31 дек 2014, 02:38

dmesg
[ 0.153366] Switched to clocksource hpet
[ 0.162714] pnp: PnP ACPI init
[ 0.162745] ACPI: bus type PNP registered
[ 0.162876] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.162881] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.162983] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.163241] pnp 00:02: [dma 0 disabled]
[ 0.163354] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.163632] pnp 00:03: [dma 2]
[ 0.163701] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.163794] system 00:04: [io 0x0290-0x0297] has been reserved
[ 0.163799] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.164002] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.164006] system 00:05: [io 0x0800-0x087f] could not be reserved
[ 0.164010] system 00:05: [io 0x0480-0x04bf] has been reserved
[ 0.164014] system 00:05: [mem 0xffafe000-0xffb0cbff] could not be reserved
[ 0.164017] system 00:05: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.164020] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.164024] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.164027] system 00:05: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.164030] system 00:05: [mem 0xfebfe000-0xfebfec00] has been reserved
[ 0.164034] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.164413] pnp 00:06: [dma 3]
[ 0.164562] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.164672] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.164676] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.164681] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.164764] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.164877] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.164882] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.165122] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.165127] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.165130] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.165134] system 00:0a: [mem 0x00100000-0xbbffffff] could not be reserved
[ 0.165138] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.165281] pnp: PnP ACPI: found 11 devices
[ 0.165283] ACPI: bus type PNP unregistered
[ 0.173142] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.173147] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000
[ 0.173157] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.173167] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.173179] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.173188] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.173191] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.173194] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.173198] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.173204] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc000000-0xbc3fffff]
[ 0.173211] pci 0000:00:1c.3: BAR 15: assigned [mem 0xbc400000-0xbc5fffff 64bit pref]
[ 0.173216] pci 0000:00:1c.4: BAR 15: assigned [mem 0xbc600000-0xbc7fffff 64bit pref]
[ 0.173220] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.173225] pci 0000:00:1f.3: BAR 0: assigned [mem 0xbc800000-0xbc8000ff]
[ 0.173231] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.173235] pci 0000:00:01.0: bridge window [io 0x6000-0x8fff]
[ 0.173239] pci 0000:00:01.0: bridge window [mem 0xff700000-0xff7fffff]
[ 0.173243] pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xdfdfffff 64bit pref]
[ 0.173248] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.173251] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.173257] pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbc3fffff]
[ 0.173261] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.173267] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.173271] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
[ 0.173276] pci 0000:00:1c.3: bridge window [mem 0xff900000-0xff9fffff]
[ 0.173281] pci 0000:00:1c.3: bridge window [mem 0xbc400000-0xbc5fffff 64bit pref]
[ 0.173287] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.173290] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff]
[ 0.173296] pci 0000:00:1c.4: bridge window [mem 0xff800000-0xff8fffff]
[ 0.173300] pci 0000:00:1c.4: bridge window [mem 0xbc600000-0xbc7fffff 64bit pref]
[ 0.173307] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.173310] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.173322] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.173324] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.173327] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.173330] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.173333] pci_bus 0000:00: resource 8 [mem 0xbc000000-0xffffffff]
[ 0.173343] pci_bus 0000:01: resource 0 [io 0x6000-0x8fff]
[ 0.173346] pci_bus 0000:01: resource 1 [mem 0xff700000-0xff7fffff]
[ 0.173349] pci_bus 0000:01: resource 2 [mem 0xbfe00000-0xdfdfffff 64bit pref]
[ 0.173352] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.173354] pci_bus 0000:04: resource 1 [mem 0xbc000000-0xbc3fffff]
[ 0.173357] pci_bus 0000:04: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.173360] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 0.173363] pci_bus 0000:03: resource 1 [mem 0xff900000-0xff9fffff]
[ 0.173366] pci_bus 0000:03: resource 2 [mem 0xbc400000-0xbc5fffff 64bit pref]
[ 0.173369] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.173371] pci_bus 0000:02: resource 1 [mem 0xff800000-0xff8fffff]
[ 0.173374] pci_bus 0000:02: resource 2 [mem 0xbc600000-0xbc7fffff 64bit pref]
[ 0.173377] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.173380] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.173383] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.173385] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.173388] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.173391] pci_bus 0000:05: resource 8 [mem 0xbc000000-0xffffffff]
[ 0.173427] NET: Registered protocol family 2
[ 0.173702] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.173915] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.174207] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.174271] TCP: reno registered
[ 0.174281] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.174322] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.174418] NET: Registered protocol family 1
[ 0.290579] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.290596] PCI: CLS 32 bytes, default 64
[ 0.290663] Unpacking initramfs...
[ 0.371742] Freeing initrd memory: 3136K (ffff8800379d0000 - ffff880037ce0000)
[ 0.372033] Scanning for low memory corruption every 60 seconds
[ 0.372547] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.373020] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.375534] zbud: loaded
[ 0.375733] VFS: Disk quotas dquot_6.5.2
[ 0.375796] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.375976] msgmni has been set to 5894
[ 0.376058] Key type big_key registered
[ 0.376265] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.376341] io scheduler noop registered
[ 0.376345] io scheduler deadline registered
[ 0.376426] io scheduler cfq registered
[ 0.376474] io scheduler bfq registered (default)
[ 0.376476] BFQ I/O-scheduler version: v7r5
[ 0.376726] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.376794] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.376882] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.377044] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.377201] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.377321] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.377347] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.377395] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.377397] vesafb: scrolling: redraw
[ 0.377399] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.377416] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010780000, using 1216k, total 1216k
[ 0.388007] Console: switching to colour frame buffer device 80x30
[ 0.398483] fb0: VESA VGA frame buffer device
[ 0.398507] intel_idle: does not run on family 6 model 15
[ 0.398557] GHES: HEST is not enabled!
[ 0.398647] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.419154] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.419703] Linux agpgart interface v0.103
[ 0.419762] rtc_cmos 00:01: RTC can wake from S4
[ 0.419903] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.419931] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.419951] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.420105] TCP: cubic registered
[ 0.420272] NET: Registered protocol family 10
[ 0.420512] NET: Registered protocol family 17
[ 0.420868] registered taskstats version 1
[ 0.421346] Magic number: 10:106:554
[ 0.421381] acpi PNP0C0F:05: hash matches
[ 0.421402] acpi PNP0C01:00: hash matches
[ 0.421446] rtc_cmos 00:01: setting system clock to 2014-12-30 22:30:54 UTC (1419978654)
[ 0.421522] PM: Checking hibernation image partition UUID=d096f47c-8f33-4b01-8251-ddf76f67d9d0
[ 0.421526] PM: Hibernation image not present or could not be loaded.
[ 0.423028] Freeing unused kernel memory: 1128K (ffffffff818e0000 - ffffffff819fa000)
[ 0.423030] Write protecting the kernel read-only data: 8192k
[ 0.425849] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
[ 0.427153] Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
[ 0.436068] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.463419] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.463423] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.463468] Floppy drive(s): fd0 is 1.44M
[ 0.463951] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.468356] ACPI: bus type USB registered
[ 0.468394] usbcore: registered new interface driver usbfs
[ 0.468412] usbcore: registered new interface driver hub
[ 0.468485] usbcore: registered new device driver usb
[ 0.469008] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.469358] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.469522] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.469531] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.469540] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.469575] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
[ 0.471097] ehci-pci: EHCI PCI platform driver
[ 0.471192] hub 1-0:1.0: USB hub found
[ 0.471211] hub 1-0:1.0: 2 ports detected
[ 0.472670] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.472684] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 0.472694] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.472731] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
[ 0.472981] hub 2-0:1.0: USB hub found
[ 0.472992] hub 2-0:1.0: 2 ports detected
[ 0.473233] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.473241] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 0.473249] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.473279] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
[ 0.473514] hub 3-0:1.0: USB hub found
[ 0.473524] hub 3-0:1.0: 2 ports detected
[ 0.473759] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.473767] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 0.473774] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.473810] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[ 0.474068] hub 4-0:1.0: USB hub found
[ 0.474079] hub 4-0:1.0: 2 ports detected
[ 0.474180] SCSI subsystem initialized
[ 0.474338] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.474348] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 0.474357] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.474392] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
[ 0.474652] hub 5-0:1.0: USB hub found
[ 0.474665] hub 5-0:1.0: 2 ports detected
[ 0.475193] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.475203] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 0.475217] ehci-pci 0000:00:1a.7: debug port 1
[ 0.479127] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.479137] ehci-pci 0000:00:1a.7: irq 18, io mem 0xffaffc00
[ 0.480660] FDC 0 is a post-1991 82077
[ 0.485622] libata version 3.00 loaded.
[ 0.486385] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.487398] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.487592] scsi0 : pata_jmicron
[ 0.487705] hub 6-0:1.0: USB hub found
[ 0.487736] hub 6-0:1.0: 4 ports detected
[ 0.487765] scsi1 : pata_jmicron
[ 0.487860] ata1: PATA max UDMA/100 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 17
[ 0.487863] ata2: PATA max UDMA/100 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 17
[ 0.488005] ahci 0000:02:00.0: version 3.0
[ 0.500096] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.500101] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.502611] scsi2 : ahci
[ 0.503052] scsi3 : ahci
[ 0.503148] ata3: SATA max UDMA/133 abar m8192@0xff8fe000 port 0xff8fe100 irq 16
[ 0.503152] ata4: SATA max UDMA/133 abar m8192@0xff8fe000 port 0xff8fe180 irq 16
[ 0.510168] hub 1-0:1.0: USB hub found
[ 0.510183] hub 1-0:1.0: 2 ports detected
[ 0.519152] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.533444] hub 2-0:1.0: USB hub found
[ 0.533458] hub 2-0:1.0: 2 ports detected
[ 0.534122] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.534133] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 0.534148] ehci-pci 0000:00:1d.7: debug port 1
[ 0.538052] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.538061] ehci-pci 0000:00:1d.7: irq 23, io mem 0xffaff800
[ 0.546718] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.546986] hub 7-0:1.0: USB hub found
[ 0.546997] hub 7-0:1.0: 6 ports detected
[ 0.570157] hub 3-0:1.0: USB hub found
[ 0.570170] hub 3-0:1.0: 2 ports detected
[ 0.593467] hub 4-0:1.0: USB hub found
[ 0.593482] hub 4-0:1.0: 2 ports detected
[ 0.616776] hub 5-0:1.0: USB hub found
[ 0.616788] hub 5-0:1.0: 2 ports detected
[ 0.616941] ata_piix 0000:00:1f.2: version 2.13
[ 0.617038] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.647236] ata1.00: ATAPI: PIONEER DVD-RW DVR-112, 1.21, max UDMA/66
[ 0.660561] ata1.00: configured for UDMA/66
[ 0.673143] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-112 1.21 PQ: 0 ANSI: 5
[ 0.771779] scsi4 : ata_piix
[ 0.771920] scsi5 : ata_piix
[ 0.772002] ata5: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
[ 0.772008] ata6: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
[ 0.772118] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.773319] scsi6 : ata_piix
[ 0.773507] scsi7 : ata_piix
[ 0.773590] ata7: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
[ 0.773594] ata8: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
[ 0.820075] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.823385] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.104151] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.146708] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 1.246736] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.253674] ata7.00: ATA-8: ST31000520AS, CC32, max UDMA/133
[ 1.253679] ata7.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.267062] ata7.00: configured for UDMA/133
[ 1.320759] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.334787] usbcore: registered new interface driver usbhid
[ 1.334790] usbhid: USB HID core driver
[ 1.335556] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C05A.0001/input/input1
[ 1.335628] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 1.373366] tsc: Refined TSC clocksource calibration: 1868.159 MHz
[ 1.420794] ata6.00: SATA link down (SStatus 0 SControl 300)
[ 1.420807] ata6.01: SATA link down (SStatus 4 SControl 300)
[ 1.431557] ata5.00: SATA link down (SStatus 0 SControl 300)
[ 1.431570] ata5.01: SATA link down (SStatus 4 SControl 300)
[ 1.431734] scsi 6:0:0:0: Direct-Access ATA ST31000520AS CC32 PQ: 0 ANSI: 5
[ 1.449601] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.449606] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.449893] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.450113] sd 6:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.450193] sd 6:0:0:0: [sda] Write Protect is off
[ 1.450197] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.450233] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.512795] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.513528] sd 6:0:0:0: [sda] Attached SCSI disk
[ 2.134756] PM: Starting manual resume from disk
[ 2.134762] PM: Hibernation image partition 8:6 present
[ 2.134764] PM: Looking for hibernation image.
[ 2.146896] PM: Image not found (code -22)
[ 2.146899] PM: Hibernation image not present or could not be loaded.
[ 2.219969] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2.222069] XFS (sda5): Mounting V4 Filesystem
[ 2.369733] XFS (sda5): Ending clean mount
[ 2.373676] Switched to clocksource tsc
[ 2.791029] random: nonblocking pool is initialized
[ 3.973336] FS-Cache: Loaded
[ 4.131531] RPC: Registered named UNIX socket transport module.
[ 4.131536] RPC: Registered udp transport module.
[ 4.131538] RPC: Registered tcp transport module.
[ 4.131539] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.599961] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 4.599968] ACPI: Power Button [PWRB]
[ 4.600199] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.600203] ACPI: Power Button [PWRF]
[ 4.692537] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4.772132] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.998291] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.998303] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.998535] r8169 0000:03:00.0: irq 45 for MSI/MSI-X
[ 4.998789] r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xffffc90010736000, 00:18:f3:0b:54:78, XID 18000000 IRQ 45
[ 4.998794] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 5.012984] [drm] Initialized drm 1.1.0 20060810
[ 5.234641] [drm] radeon kernel modesetting enabled.
[ 5.234713] checking generic (c0000000 130000) vs hw (c0000000 10000000)
[ 5.234716] fb: switching to radeondrmfb from VESA VGA
[ 5.234741] Console: switching to colour dummy device 80x25
[ 5.235090] [drm] initializing kernel modesetting (R580 0x1002:0x7240 0x1043:0x018A).
[ 5.235104] [drm] register mmio base: 0xFF7F0000
[ 5.235106] [drm] register mmio size: 65536
[ 5.235917] ATOM BIOS: 7240.9.12.5.2.AS03
[ 5.235939] [drm] Generation 2 PCI interface, using max accessible memory
[ 5.235946] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 5.235949] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 5.235976] [drm] Detected VRAM RAM=512M, BAR=256M
[ 5.235978] [drm] RAM width 256bits DDR
[ 5.236057] [TTM] Zone kernel: Available graphics memory: 1510100 kiB
[ 5.236059] [TTM] Initializing pool allocator
[ 5.236069] [TTM] Initializing DMA pool allocator
[ 5.236094] [drm] radeon: 512M of VRAM memory ready
[ 5.236096] [drm] radeon: 512M of GTT memory ready.
[ 5.236114] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.237448] [drm] Possible lm63 thermal controller at 0x18
[ 5.237471] [drm] radeon: power management initialized
[ 5.247070] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[ 5.248019] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 5.248046] radeon 0000:01:00.0: WB enabled
[ 5.248051] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000000 and cpu addr 0xffff8800b64e8000
[ 5.248054] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.248056] [drm] Driver supports precise vblank timestamp query.
[ 5.248081] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[ 5.248096] radeon 0000:01:00.0: radeon: using MSI.
[ 5.248119] [drm] radeon: irq initialized.
[ 5.248142] [drm] Loading R500 Microcode
[ 5.291697] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 5.291815] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041f conflicts with OpRegion 0x0000000000000400-0x000000000000040f (\SMRG) (20140424/utaddress-258)
[ 5.291822] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.385818] [drm] radeon: ring at 0x0000000020001000
[ 5.385843] [drm] ring test succeeded in 2 usecs
[ 5.385983] [drm] ib test succeeded in 0 usecs
[ 5.386442] [drm] Radeon Display Connectors
[ 5.386445] [drm] Connector 0:
[ 5.386447] [drm] SVIDEO-1
[ 5.386448] [drm] Encoders:
[ 5.386450] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 5.386452] [drm] Connector 1:
[ 5.386453] [drm] DVI-I-1
[ 5.386455] [drm] HPD1
[ 5.386457] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 5.386459] [drm] Encoders:
[ 5.386461] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 5.386463] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 5.386465] [drm] Connector 2:
[ 5.386466] [drm] DVI-I-2
[ 5.386468] [drm] HPD2
[ 5.386470] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 5.386472] [drm] Encoders:
[ 5.386473] [drm] DFP2: INTERNAL_KLDSCP_DVO1
[ 5.424288] [drm] fb mappable at 0xC00C0000
[ 5.424292] [drm] vram apper at 0xC0000000
[ 5.424294] [drm] size 3145728
[ 5.424296] [drm] fb depth is 24
[ 5.424297] [drm] pitch is 4096
[ 5.424410] fbcon: radeondrmfb (fb0) is primary device
[ 5.447118] Console: switching to colour frame buffer device 128x48
[ 5.449604] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 5.449607] radeon 0000:01:00.0: registered panic notifier
[ 5.466888] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[ 5.522282] sound hdaudioC0D0: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[ 5.522288] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.522292] sound hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 5.522295] sound hdaudioC0D0: mono: mono_out=0x0
[ 5.522298] sound hdaudioC0D0: dig-out=0x1b/0x0
[ 5.522300] sound hdaudioC0D0: inputs:
[ 5.522304] sound hdaudioC0D0: Front Mic=0x14
[ 5.522307] sound hdaudioC0D0: Rear Mic=0x17
[ 5.522309] sound hdaudioC0D0: Line=0x15
[ 5.522312] sound hdaudioC0D0: Line=0x1a
[ 5.522315] sound hdaudioC0D0: CD=0x18
[ 5.537947] microcode: CPU0 sig=0x6f2, pf=0x1, revision=0x56
[ 5.538102] microcode: CPU1 sig=0x6f2, pf=0x1, revision=0x56
[ 5.541129] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.548414] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input4
[ 5.548785] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 5.548841] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 5.548897] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.548952] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.549007] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.549062] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.590767] coretemp coretemp.0: Using relative temperature scale!
[ 5.590781] coretemp coretemp.0: Using relative temperature scale!
[ 5.860582] parport_pc 00:06: reported by Plug and Play ACPI
[ 5.860689] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 6.391856] iTCO_vendor_support: vendor-support=0
[ 6.392652] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.392698] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
[ 6.392846] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.400331] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 6.469331] Adding 7810044k swap on /dev/sda6. Priority:-1 extents:1 across:7810044k FS
[ 6.515500] XFS (sda7): Mounting V4 Filesystem
[ 7.059069] ppdev: user-space parallel port driver
[ 7.090254] XFS (sda7): Ending clean mount
[ 7.396610] mousedev: PS/2 mouse device common for all mice
[ 7.481068] FS-Cache: Netfs 'nfs' registered for caching
[ 7.515877] systemd-journald[152]: File /var/log/journal/0210229bf91e45717a3f1a1654a346a7/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 7.639859] systemd-journald[152]: Received request to flush runtime journal from PID 1
[ 9.661495] cfg80211: Calling CRDA to update world regulatory domain
[ 10.247987] r8169 0000:03:00.0 enp3s0: link down
[ 10.248043] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 11.823104] r8169 0000:03:00.0 enp3s0: link up
[ 11.823116] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 12.358333] Non-volatile memory driver v1.3
[ 22.109781] PPP generic driver version 2.4.2
[ 23.085063] fuse init (API version 7.23)
[ 24.051410] PPP BSD Compression module registered
Аватара пользователя
rapturev
 
Автор темы
Сообщения: 8
Зарегистрирован: 28 дек 2014, 20:57
Благодарил (а): 0 раз.
Поблагодарили: 0 раз.

Re: Черные полосы при 1920x1080 на radeon x1950

Сообщение dimonmmk » 31 дек 2014, 13:50

Дело, похоже, дохлое...
По итогам экспериментов Вам уже самому, надеюсь, понятно что Ваша проблема- аппаратная. Если монитор не заводится ни в каких дистрах Линукса и даже в Виндах, и даже при подключении к нетбуку по HDMI... Решать аппаратные проблемы программными настройками- оно Вам надо? Если сходу не вышло- дело почти безнадежное. Не, если действительно надо- Вы скажите, будем думать. Но... без гарантий.
И сперва кабель поменяйте, хотя бы... Без этого- вообще все без толку. А если замена кабеля не поможет- несите монитор по гарантии обратно в магазин и берите другой, делов-то. Самсунги той же линейки, но 27е- ненамного дороже. BenQ с той же матрицей - даже дешевле, и сделаны лучше (тупо прочнее), хотя внешний вид и не такой понтовый как у самсунгов.
Пусть при Вас проверят работоспособность. И комплектность (кабель). Сэкономите время, нервы и в итоге деньги.
Аватара пользователя
dimonmmk
 
Сообщения: 604
Зарегистрирован: 10 июл 2014, 19:08
Откуда: 57° 3'51.28" 36° 1'43.38"
Благодарил (а): 14 раз.
Поблагодарили: 134 раз.

Re: Черные полосы при 1920x1080 на radeon x1950

Сообщение rapturev » 31 дек 2014, 14:08

При покупке подключали к нетбуку - все работало.
Аватара пользователя
rapturev
 
Автор темы
Сообщения: 8
Зарегистрирован: 28 дек 2014, 20:57
Благодарил (а): 0 раз.
Поблагодарили: 0 раз.

Re: Черные полосы при 1920x1080 на radeon x1950

Сообщение dimonmmk » 31 дек 2014, 16:36

rapturev писал(а):При покупке подключали к нетбуку - все работало.
Чудеса. Если, конечно, подключали Вашим кабелем. А если своим или через hdmi- то ничего удивительного. Такой аппаратуры, которая в магазине работает, а за порогом магазина нет- вагоны. :)
Может, Вам как раз его (родной кабель) забыли после проверки обратно в коробку положить? Потому как обычно VGA-кабель всегда идет в комплекте с монитором. С Вашим кабелем монитор отдает системе явно неверную геометрию панели.
У Вас на Винде с паверстрипом тоже "все работает". Только должно-то работать без костылей.

Да возьмите Вы у друзей/соседей ноутбук и видеокабель на полчасика, проверьте уже нормально аппаратуру.
Аватара пользователя
dimonmmk
 
Сообщения: 604
Зарегистрирован: 10 июл 2014, 19:08
Откуда: 57° 3'51.28" 36° 1'43.38"
Благодарил (а): 14 раз.
Поблагодарили: 134 раз.

Пред.

Вернуться в Уголок новичка



Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 2